Metal business cards with deep etching is a specialty at My Metal Business Card! When it comes to producing the world’s finest metal business cards, we use chemical-etching to engrave into the surface. In fact, every card is made-to-order through a sophisticated multi-step chemical etching process to etch your cards from sheets of metal. Typically, surface etching is about 10% into the depth of the .5mm stainless steel; however, we are also able to etch deeper into the card – up to 50%!
Upon your request, we can etch 50% down into the metal business card surface for a more dramatic and emphasized etched design. In other words, the etching is halfway into the card instead of etching on the top surface only. Variations of 10% and 50% etching allows for etched areas of your metal card to be accentuated while appearing more subtly in others. The result is a multidimensional business card that stands out among the rest! Show your customers and potential clients that you are detail-oriented and take pride in representing yourself with these multifaceted metal business cards.
So you may be asking yourself, what areas of my card can be 50% etched? Due to tolerances involved with the chemical etching process, we recommend 50% etched content that is not too small or detailed. It is also important to keep in mind that 50% etching a large area may weaken the card and its durability can be compromised.
For an assessment of your design and any questions about 50% etching, please contact us at 714.213.8155 or email email@example.com. We look forward to hearing from you!